To Clean Externally; To Clean The Cold Air Intake; To Examine The Spark Plug - Husqvarna K1270 II R Manual De Usuario

Maintenance
Clean the external surfaces
of the product.
Clean the cold air intake.
Clean the spark plug.
Clean the fuel tank.
Do a general inspection.
Examine the throttle lock-
out*.
Do a check of the stop
switch*.
Do a check for fuel leaks.
Do a check of the vibration
damping system*.
Examine the muffler*.
Examine the carburetor.
Examine the starter hous-
ing.
Examine the fuel system.
Examine the air filter.
Examine the drive gear and
the clutch.

To clean externally

• Flush the product externally with clean water after
each day of operation. If it is necessary, use a brush.

To clean the cold air intake

Note: A dirty or blocked air intake makes the product too
hot. This can cause damage to the piston and cylinder.
12
Daily
X
X
X
X
X
X
Weekly
X
X
X
X
• Clean the cold air intake if it is necessary.
• Remove blockage, dirt and dust with a brush.

To examine the spark plug

Note: Always use the recommended spark plug type.
Use of the incorrect spark plug can cause damage to the
Monthly
X
X
X
X
X
1390 - 001 - 10.01.2020