Switching On The Appliance - Siemens KG Serie Instrucciones De Uso

13
°C button to select the room and
alarm off
Used to select a room. This is
necessary to change its
temperature or to switch on
certain special functions.
Used to switch off the alarm.
14
Button "lock" function
If this function is switched on, no
settings are possible via
the controls.
15
Display alarm off
This lights up if the appliance
becomes too warm.
16
Display sabbath
This lights up when the Sabbath
mode is switched on.
17
Display alarm
This lights up if the freezer
compartment is too warm or if the
freezer compartment door is open
too long.
18
Display freeze
This lights up if the freezer
compartment is selected.
19
Display hyperFresh
This lights up if the hyperFresh
compartment is selected.
20
Alarm display
This lights up if the refrigerator
compartment door is open too
long.
21
Display cool
This lights up if the fridge
compartment is selected.
Switching on the
appliance
1. First insert the plug into the
connection on the back of the
appliance. Check that the plug has
been inserted all the way.
2. Then insert the other end of the cable
into the socket.
The appliance is now switched on and a
warning signal sounds.
Press the °C button to switch off the
audible warning signal.
The alarm display goes out when the
appliance has reached the set
temperature.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended the
following temperatures:
freezer compartment: -18°C
■
hyperFresh compartment: 0 °C to
■
2 °C
cooling compartment: +4°C
■
en
11