Service; Truck-Mounted Charging System Field Repairs; Internal Pcb Fuse Replacement; Ordering Information - MSA EVOLUTION 5000 Manual De Instrucciones

GB

Service

If your EVOLUTION 5000 Thermal Imaging Camera (TIC) is in
need of service or repair, please contact the MSA European
Repair Centre at + 49 30 6886 555. Describe the problem to
the Representative as completely as possible.
1. Verify with your Representative that the product should be
returned to MSA.
2. Before returning the product, decontaminate and clean
your Thermal Imaging Camera to remove any hazardous
materials that may have settled on the product during use.
Truck-Mounted Charging System Field
Repairs
Note: Only remove the Truck-Mounted Charging System's
back cover after the unit has been disconnected from the
power source.

Internal PCB Fuse Replacement

Power LED will not light and other troubleshooting
guidelines do not resolve the problem.
1. Remove charger from mounting brackets. Using a screw-
driver, remove the three retaining clips from the plastic
bosses and remove the back cover.
2. Disconnect the power hook-up cable by disconnecting the
Phoenix connector from the plug-in receptacle on the
upper right side of the printed circuit board panel.
3. The internal printed circuit board fuse is located next to the
Phoenix connector on the circuit board. Remove the fuse
using the plastic, non-conductive tweezers and replace it
with a new fuse.
4. Reconnect the power hook-up cable to the Phoenix con-
nector and replace the back cover. Secure the cover with
the retaining clips and bolt it back to the mounting
brackets.
GB
Power Cable / Phoenix Connector Power Cable / Phoenix Connector
Fig. 21: Location of Power Cable, Phoenix Connector and
Internal Fuse

10. Ordering Information

Spare Part / Accessory
Desk Top Charger 220/230 V AC 50 Hz
Lithium Ion Battery
EVOLUTION 5000 Truck-Mounted
Charging System
Wrist Strap
Shoulder Strap
Retractable Lanyard
Carabiner
Sun Shroud
Reflective Trim Kit
Disposable Display Covers
Non-Charging Mounting Bracket
Carrying Case
Tripod Mount
Video Out Cable SMA to BNC
Instruction Manual
Truck Mounted Charging System
Internal Fuse Internal Fuse
Part No.
10043951
10043960
10038977
10039516
10039515
10040226
10040005
10039603
10040163
10038970
10039602
10040223
10040229
10040004
10044503
17