Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
– PUMP. Containers and external channeled bags vacuum cycle start key
b
It allows activating the vacuum cycle in containers or channeled bags placed outside the vacuum chamber
(LED
2
on).
Vacuum in containers: once the required vacuum level has been reached the cycle ending press STOP key.
Vacuum in channeled bags (outside the chamber): pressing the SEAL key, the cycle ends with bag sealing.
Other functions of the PUMP key: pressed for 5 seconds, it activates the vacuum sensor calibration.
– SEAL. Sealing button
C
in channeled bags outside the chamber and to anticipate the sealing moment compared the standard cycle
duration (to obtain a partial vacuum).
Welding adjustment: each time SEAL key is pressed, corresponds to the lighting of a LED, up to four maximum, cor-
responding to the usable different sealing times. The sealing time needs to be adjusted according to the thickness and
materials used to manufacture the vacuum bag.
Other functions of the SEAL key: pressed for 5 seconds, it activates/deactivates the acoustic signal.
– START/STOP.
D
immediate air return in the vacuum chamber.
26
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
D
C
4
3
. It allows to adjust the sealing time, to activate the sealing in case of Vacuum
Cycle start and stop key. Allow to start the vacuum cycle or to stop it proceeding to the
b
A
2
1
LED
1
+
2
ON:
(FACTORy SETTING):
PA/PE storage vacuum bags, 90 micron thickness.
LED
+
+
1
2
PA/PE storage vacuum bags, 100 micron thickness.
OPA/PP cooking bags, 60-80 micron thickness.
LED
1
+
2
+
PA/PE storage vacuum bags, 140 micron thickness.
LED
ON:
1
PA/PE storage vacuum bags, 60-70 micron
thickness.
.
ON:
3
3
+
4
ON:
Publicidad
Capítulos
Tabla de contenido
