Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING! Unauthorized modifications
!
and/or accessories may lead to serious
injury or death to the user or others.
Do not modify this product or use it if it
appears to have been modified by others.
Never use a machine, battery or battery
charger that is faulty. Carry out the
checks, maintenance and service
instructions described in this manual.
Some maintenance and service
measures must be carried out by trained
and qualified specialists. See
instructions under the heading
Maintenance.
Only use original spare parts.
Always use common sense
It is not possible to cover every conceivable situation you
can face. Always exercise care and use your common
sense.
If you get into a situation where you feel unsafe, stop and
seek expert advice. Contact your dealer, service agent or
an experienced user. Do not attempt any task that you feel
unsure of!
Work area safety
•
Always check the back of the wall where the guide bar
and diamond chain comes out when cutting through.
Secure, cordon off and make sure that no people can
be injured or materials damaged.
•
Always check and mark out where gas pipes are
routed. Cutting close to gas pipes always entails
danger. Make sure that sparks are not caused when
cutting in view of the risk of explosion. Remain
concentrated and focused on the task. Carelessness
can result in serious personal injury or death.
•
Make sure that no pipes or electrical cables are routed
in the working area or in the material to be cut.
•
Make sure there are no live electrical cables within the
working area.
•
Make sure no unauthorised persons are in the
working area, otherwise there is a risk of serious
personal injury. The safety distance is 15 meters (50
ft.).
•
Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
•
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
•
Ensure that the working area is sufficiently illuminated
to create a safe working environment.
•
Always ensure you have a safe and stable working
position.
OPERATING
The machine's risk area
15 m (50 ft)
!
!
IMPORTANT! No persons that do not have the
protective equipment described above shall be allowed
inside the risk area for thrown material.
Electrical safety
See the electrical safety sections of the manuals for the
wall saw and the power pack that is used.
!
Personal safety
•
Never leave the machine unsupervised with the motor
running.
•
Never saw in such a way that you cannot easily reach
the emergency stop on the remote control or on the
power pack. See power pack manual.
•
Make sure that there is always another person close
at hand when you use the machines, so that you can
call for help if an accident should occur.
4 m(13 ft)
WARNING! Make sure no unauthorised
persons are in the working area,
otherwise there is a risk of serious
personal injury. The safety distance is 15
meters (50 ft.).
WARNING! For the operator the minimum
safety margin to moving parts during
operation is 4 meters (13 ft). The operator
must always stand at an angle diagonally
behind an operating saw, to prevent the
risk of being struck by objects from the
material. Be extra careful at start-up
when the saw penetrates the material.
WARNING! Do not pressure wash the
machine, as water can enter the
electrical system or the engine and
cause damage to the machine or short
circuit.
–
English
13
Publicidad
Capítulos
Tabla de contenido
