Linking A Remote Control To A Stimulator - Boston Scientific Vercise DBS Instrucciones De Uso

Vercise™ DBS Programming Manual

Linking a Remote Control to a Stimulator

Linking is defined as the process of configuring the Remote Control to communicate with a specific
Stimulator.
To link a Remote Control that has been previously linked to a different Stimulator, you must first
de-link the Remote Control from the original Stimulator (see De-linking a Remote Control from a
Stimulator on page 6) and then link the Remote Control to the new Stimulator.
To link a Remote Control to a Stimulator:
1 Press and hold the
The Remote Control will ask if you want to link it to a Stimulator.
2
Position the Remote Control within 18 inches (45 cm) of the Stimulator and orient the large
surface of the Remote Control parallel to large surface of the Stimulator.
P
3 Press the button to link the Remote Control with the Stimulator or cancel by pressing the
button.
4
Confirm the link by pressing the
If programs are
stored in the...
Remote Control
Stimulator
Remote Control
Stimulator
Remote Control
Stimulator
Remote Control
Stimulator
Vercise™ DBS Programming Manual
91053785-07 4 of 323
P
button to unlock the Remote Control.
P
button or cancel by pressing the button.
Then...
The Remote Control will automatically download the programs from
the Stimulator.
The Remote Control will automatically download the programs from
the Stimulator.
The Remote Control will ask if you want to download the Remote
Control programs to the Stimulator.
Enter the password A-B-C to download the Remote Control
programs to the Stimulator.
The Remote Control will be linked to the Stimulator immediately.