Increasing And Decreasing The Rate - Boston Scientific Vercise DBS Instrucciones De Uso

Vercise™ DBS Programming Manual

Increasing and Decreasing the Rate

The pulse rate of the stimulation, often called just the rate or the frequency, dictates how many
stimulation pulses are delivered in a second, measured in Hertz (Hz) or pulses per second (pps).
1
To increase the rate, click or click and hold the
Programming Screen.
Note: If you attempt to adjust the rate above the charge density limit, then you will see a
caution message.
2
To decrease the rate, click or click and hold the
Vercise™ DBS Programming Manual
91053785-07 28 of 323
button below the RATE label on the
button below the RATE label.