Activating A Program From The Remote Control Panel - Boston Scientific Vercise DBS Instrucciones De Uso

Activating a Program from the Remote Control Panel

A program that has been stored to one of the four program slots may be activated to become the
current stimulation program. The activated program may then be modified in the Programming
screen. Depending on the steps you take below, you may activate a program with stimulation on or
stimulation off.
To activate a program:
1
Click the program on the right of the screen that you want to activate.
Note: The  symbol indicates last activated or saved program.
2
To activate the program with stimulation on, click
If stimulation is off, stimulation will turn on. If stimulation is already on, stimulation will
remain on.
3
To activate the program with stimulation off, click
If stimulation is on, stimulation will turn off. If stimulation is already off, stimulation will
remain off.
Note: If the current program has not been saved, then a pop-up window will ask if you
want to continue. If you do not want to save the current program, click
to continue and activate the selected program. If you do want to save the current
program, click and save the current program.
Managing Programs
.
.
Vercise™ DBS Programming Manual
91053785-07 43 of 323