Control Panel Overview; Navigation - STA-RITE VS Serie Guia De Instalacion

9
Navigation Overview
• +, - keys Increase/decrease selected value.
Pressing any key following a change accepts the current value displayed inside the setting.
•
Duration (Hrs.)LED
+ / - Buttons
If power is connected to the SuperFlo
following buttons referred to in this section could result in the motor starting. Failure to recognize
Note: The START button must be pressed for the pump to operate. The START LED will illuminate after the
button has been pressed indicating the pump is capable of operating. Pressing the stop button will turn off
the START LED and stop the motor if running.
Active Step
LEDs (x4)
Speed LED
Bar Graph
Figure 3: Control Panel
®
this could result in personal injury or damage to equipment.

CONTROL PANEL OVERVIEW

Programming
Buttons (x4)
Power LED
Fault LED
VS Variable Speed Pump motor, pressing any of the
Start Button
Stop Button