Safe2Go Car Seat P; Maxi-Cosi Car Seat P; Traveller Car Seat P; Graco Car Seat P - Mutsy 4Rider Manual De Instrucciones

English
· Place your child in the seat and make
sure that the legs of your child are on
both sides of the crotch strap.
· Take care that the seat as well as the
foot rest is adjusted correctly to the
length of your child.
· The pushchair has a 5-point safety har-
ness. You operate the safety harness by
fixing all the plastic parts.
· The safety harness can be adjusted by
moving the plastic parts over the belts
and placing them in the desired posi-
tion.
Safe2go Car Seat (0-13 kg)
Placing the Safe2go on the frame (r)
· Revolve the fastening parts from under
the shell of the car seat.
· Position the Safe2go in such a way that
you can see your child when you walk
behind the pushchair.
· Place the Safe2go with the faste-
ning parts above the universal fixation
points of the frame. Push the Safe2go
down until it firmly clicks. Make sure
that the Safe2go is fixed properly and
that the red surfaces in the universal
fixation points are fully covered.
Removing the Safe2go from the frame
· Push the two release buttons of the
universal fixation points in backward
direction until the Safe2go releases.
The Safe2go can now be taken from
the frame.
Maxi Cosi Car Seat (0-13 kg)
Placing the Maxi Cosi on the frame (o)
· Place the Maxi Cosi adapter set in the
universal fixation points of the frame.
Place the adapter with R on the right
side and place the adapter with L on
the left side. Push the adapters down
until they firmly click. Make sure that
the adapters are fixed properly and that
the red surfaces in the universal fixa-
tion points are fully covered.
· Place the Maxi Cosi over the adapters
and push the Maxi Cosi down until it
firmly clicks. Make sure that the Maxi
Cosi is fixed properly.
Removing the Maxi Cosi from the frame
· Push the release buttons that are on
20
the sides of the Maxi Cosi and lift the
Maxi Cosi off from the adapters.
· Remove both adapters by pushing the
two release buttons of the universal fix-
ation points in backward direction until
the adapters release. The adapters can
now be taken from the frame.
Traveller Car Seat (0-10 kg)
Placing the Traveller on the frame(p)
· Place the adapter set in the universal
fixation points of the frame.
! Place the adapter with R on the right
side and place the adapter with L on
the left side. Push the adapters down
until they firmly click. Make sure
that the adapters are fixed properly
and that the red surfaces in the uni-
versal fixation points are fully cov-
ered.
· Place the Traveller backwards on the
frame. Lock the Traveller by moving
the carrying handle to the side of
the head. Ensure that the Traveller is
fixed correctly by trying if the car seat
can be removed from the frame.
Removing the Traveller from the frame
· Turn the lever to adjust the carrying
handle of the traveller and push the
carrying handle in the vertical posi-
tion.
· Lift the Traveller by the carrying handle
off the adapters.
· Remove both adapters by pushing the
two release buttons of the universal fix-
ation points in backward direction until
the adapters release. The adapters can
now be taken from the frame.
Graco Autobaby (2,3-10 kg and < 73 cm)
Graco Logico S (2,3-13 kg and < 80 cm)
Placing the Graco on the frame (q)
· Place the adapter in the universal
fixation points of the frame. Push the
adapter down until it firmly clicks.
Make sure that the adapter is fixed
properly and that the red surfaces in
the universal fixation points are fully
covered.
· Place the Graco on the adapter and
push it down until it firmly clicks. Pull
up on the Graco to be sure it is latched
firmly onto the adapter.