Vimar ELVOX RS06 Manual De Instrucciones Para La Conexión Y El Uso página 36

7.1 LRNE:
quick procedure for programming gate travel
1
Starting with the closing limit switch engaged (gate closed), after entering programming mode by pressing the UP, OK, and AP/CH button, the gate starts
opening at reduced speed until the opening limit switch is engaged. After 2 seconds the gate starts closing at cycle speed and slows down approximately
50cm from being completely closed and continues until the closing limit switch is engaged. The control panel saves the gate travel, with default deceleration
speed and distances.
34 34
2
x3
5
CLOSING
3
6
4
7
EN