Complete Programming - Vimar ELVOX RS06 Manual De Instrucciones Para La Conexión Y El Uso

6.2 Procedure for saving a remote control associated with button APCH:
1
x2
Press the UP button 2 times, the display will show RAD
Press the OK button, the display will show 1CH (indicating that the remote control button will be saved as AP/CH of the control panel) Press the OK button,
4 dots will appear on the display, indicating that the control panel is waiting for a remote control button to be tapped (timeout 10 seconds) After pressing the
remote control button the display will show a 4-digit number: the first digit indicates association (1 controls the AP/CH input 2 controls the pedestrian entrance
or the second channel output) the other 3 indicate the memory cell occupied by the remote control (the first remote control occupies cell 001, the second one
cell 002), the maximum capacity is 200 remote controls To save other remote controls repeat the procedure.
N.B.: The first saved remote control configures the control panel to accept only remote controls with a rolling code or only remote controls with a fixed 12-bit
code
6.3 Example of the procedure for changing the automatic closing time:
1
x4
6
Press the UP button 4 times, the display will show PAR (parameters)
Press OK, the display will show P01
Press the UP button once, the display will show P02 (automatic closing time)
Press the OK button, the display will show the automatic closing time
With the DOWN or UP button you can vary the automatic closing time
Press the OK button to confirm and save the modified value
7- Full description of the programming menu.
The programming menu is divided into 3 levels: first the main level, second the parameters level and third the values level
Main menu:
Display Message
After selecting the desired item from the main menu by pressing the UP or DOWN button, confirm by pressing OK.
EN
2
2
LRNE
RAD
LRN
PAR
DEF
CNT
ERR
PASS
3 4
3 4
Learning travel with quick programming (see section 6)
Remote control management
Learning travel with custom programming
Used to modify all the parameters of the control panel
Used to go back to the default values
Used to view the manoeuvres carried out
Used to view a list of the last 9 errors or malfunctions
Control panel protection level setting
5
5
Description
33 33