Ec Declaration Of Incorporation - Siemens SIMOTICS M-1PH818 Instrucciones De Servicio

Assembly instructions ECblue

EC Declaration of Incorporation

9.3
as defined by the EC Machinery Directive 2006/42/EC, Annex II B
The design of the incomplete machine:
•
Axial fan FA.., FB.., FC.., FE.., FF.., FS.., FT.., FH.., FL.., FN.., FV.., DN.., VR.., VN.., ZC.., ZF.., ZN..
•
Centrifugal fan RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ.., GR.., ER..
•
Cross-flow fan QK.., QR.., QT.., QD.., QG..
Motor type:
•
Induction internal or external rotor motor (also with integrated frequency inverter)
•
Electronically commutated internal or external rotor motor (also with integrated EC controller)
complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in EG Machinery Directive
2006/42/EG.
The manufacturer is the
The following harmonised standards have been used:
EN 60204-
1:2006+A1:2009
EN ISO 12100:2010
EN ISO 13857:2008
Note:
The specific technical documentation in accordance with Appendix VII B has been written and is available in its
entirety.
The person authorised for compiling the specific technical documentation is: Dr. W. Angelis, address see above.
The specific documentation will be transmitted to the official authorities on justified request. The transmission can
be electronic, on data carriers or on paper. All industrial property rights remain with the above-mentioned
manufacturer.
It is prohibited to commission this incomplete machine until it has been secured that the machine into
which it was incorporated complies with the stipulations of the EC Machinery Directive.
Künzelsau, 29.01.2016
192
L-BAL-F065-GB 1617 Index 004
ZIEHL-ABEGG SE
Heinz-Ziehl-Strasse
D-74653 Künzelsau
Safety of machinery; electrical equipment of machines; Part 1: General
requirements
Safety of machinery - General principles for design - Risk assessment and
risk reduction
Safety of machinery; safety distances to prevent danger zones being
reached by the upper limbs
The maintenance of the EN ISO 13857:2008 relates only to the installed
accidental contact protection, provided that it is part of the scope of
delivery.
Dr. W. Angelis - Technical Director Ventilation Division
Part.-No. 00702801-GB
26/28
EC Declaration of Incorporation
ZA87-GB-01/16 Index 005
00296702-GB