Pcc-14 Plumbing Box Use With Esp-200 Power Supply - ESAB PCC-14 Manual De Instrucciones

SEcTIoN 2
2.8 Pcc-14 Plumbing Box use with ESP-200 Power Supply
Remove Plug P5 from J5 Receptacle
The ESP-200 is supplied from the factory with Plug
P5 connected to the J5 Receptacle . If the unit is
to be used with a PCC-14 Plumbing Box, install
Adaptor (0558006530) as shown .
J5 J6
ESP-200 Power Supply
Note:
DEScRIPTIoN / INSTallaTIoN
ESP-200 Power Supply
Adaptor
0558006530
P2
Connect Plug P2 into J5 Receptacle
Connect Plug P3 into J6 Receptacle
P3 P1
22
J5
J6
Reconnect Plug P5
into P1 Receptacle