11.5 – SUBSTITUTION PRINTER PAPER
Thermographic paper roll 57 mm wide. Thermographic paper can be printed on one side only.
Open the printer cover (1), place the paper roll by paying attention to the rotation direction (2), pull the paper
until it comes out and close the cover (3); the printer is ready for printing (4).
11.6 – PRINTER STATUS
If the cover of the printer is not perfectly closed, on the display the letter "D" appears.
Open and close the printer's cover.
If paper is missing, on the display the letter "P" will appear.
Open the cover, insert paper and re-close the cover.
60
DXBA408 Rev_14