Blc On - Eneo VKC-1340/IR Instrucciones De Manejo

5.3 BLC ON

Press the MENU button to access the „BLC" mode.
• DEFAULT
Display the saved default BLC zone in the monitor.
• ADJ SIZE
Adjust the height and width of the saved default BLC zone.
• ADJ AREA
Move the area of the adjusted BLC zone.
• LEVEL
Adjust „BLC LEVEL" to the desired mode using
(In the range 0~50 and adjust BLC Gain.)
• EXIT
Return to MAIN MENU
<BLC MENU>
MODE
ADJ SIZE
ADJ AREA
LEVEL (0~50)
EXIT
Fig. 4: BLC table
or
31
button.