Control And Connections - Day/Night I/O Terminals - Eneo VKC-1340/IR Instrucciones De Manejo

5.8 DEFAULT
Camera initialize mode is selected (DEFAULT).
5.9 SAVE & EXIT
Save the changed preset parameter and terminate.
5.10 EXIT

6. Control and Connections - Day/Night I/O Terminals

1
RS-485
485-(TX)
1 Camera Control
• PIN 1: RS 485-
• PIN 2: RS 485+
2 Day&Night I/O Terminals
To select Day/Night mode using external equipment, connect control lines to the appropriate terminals.
• PIN 3: Control OUT
Regardless of the D/N mode, it is provided 0V at Colour mode, and 5V at B/W mode.
• PIN 4: COM
Use when you want to change to the B/W mode.
• PIN 5: Control IN
Change to the B/W mode when connected to the COM terminal and change to the Colour mode when
disconnected.
2
485+(RX)
3 4
O/I
OUT COM
36
5
IN