Eneo VKC-1340/IR Instrucciones De Manejo página 37

3 Power Input Terminal
VKC-1340IR/12-24, EDP No. 92038
VKC-1340/IR, EDP No. 92039
4 Video Out Connector
• BNC: This BNC connector provides a 1.0Vp-p/75ohms composite video signal.
• Y/C: Y (1.0Vp-p) and C (0.3Vp-p) signals are provided at this connector.
Pin
1
2
3
4
• Unshielded Twisted Pair video Transmission (UTP) for effective installation.
• This terminal accepts a 12VDC or 24VAC power source from a 12VDC
or 24VAC ±10%, 50/60Hz ±1Hz
• Use certified / listed class 2 power supply only.
• In DC power, use the adapter mode than 12VDC 500mA capacity.
• Mains Cable
The mains cable is suitable for a 100-240VAC ~ 50/60Hz ±1Hz
connection.
Y/C Signal
GND Y
GND C
Y
C
37