ABB ACH580-01 Guía Rápida De Instalación Y Puesta En Marcha página 317

To change a value in an edit view:
• Use and to move the cursor left and
right.
• Use and to change the value.
Press (Save) to accept the new setting, or
press (Cancel) to go back to the previous
view without making changes.
This step is optional, and requires rotating the
motor. Do not do this if it could cause any risk, or if
the mechanical set-up does not allow it.
To do the direction test, select Spin the motor
and press (Next).
Press the Hand key
Hand
drive.
Check the direction of the motor.
If it is forward, select Yes, motor is spinning
forward and press
If the direction is not forward, select No, fix
direction and press
Select the localization you want to use and press
(Next).
on the panel to start the
(Next) to continue.
(Next) to continue.
EN – Quick start-up guide 317
R0-
R4
R1-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH