Saw Blades, Other Accessories; Sawing With Special Base Runners; Sawing With The Angle Table - Festool CARVEX PS 420 EBQ Manual De Instrucciones

original Festool accessories and Festool consum-
able material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
WARNING
Risk of injury, electric shock

Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!

Saw blades, other accessories

In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
jigsaw.

Sawing with special base runners

The special base runners protect high-quality sur-
faces against scratches and scores.

Press in the base runner at position [7-1].

At the same time, push the base runner for-
wards.

Mount another base runner and push it to the
rear until it engages.
7
The angle table WT-PS 400 is used for cutting pipes
or interior and exterior angles up to 45°.
Installing the angle table

Remove the saw base [1-11], (see chapter ).

Position the angle table against the saw base
support.

Close the lever [1-9].
Ensure that the angle table is firmly seated in the
guide.
Setting the angle

Turn the adjusting wheel [8-1] to select the re-
quired angle.
You can select the angles -45°, 0° and +45° on the
scale [8-2] .
Sawing cutting depths
Risk of injury

Select the saw blade length and cutting depth so
that the saw blade remains plunged in the work-
piece.
7-1

Sawing with the angle table

Dust extraction is not possible when sawing
with the angle table!
WARNING
15