Technical Data - Festool CARVEX PS 420 EBQ Manual De Instrucciones

wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
– Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the workpiece by hand or against your
body leaves it unstable and may lead to loss of
control.
– Stroboscopic light can cause epileptic seizures.
Do not use this machine if you are susceptible to
epileptic seizures.
– Do not look into the stroboscope light. Looking
into the light source can damage your vision.
Health hazard by dust
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
Jigsaws
Power
Stroke speed
Stroke length
Pendulum stroke
max. inclination (only with accessory angle
table WT-PS 400)
max. cutting depth (depending on saw blade)
Weight
8
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.

Technical data

PS 420 EBQ
1500 - 3800 rpm
Wood
Aluminium
Steel
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
WARNING
PSB 420 EBQ
400 W
1000 - 3800 rpm
26 mm (1.02 '')
4 steps
45° to both sides
120 mm (4.72 '')
20 mm (0.79'')
10 mm (0.39'')
1.9 kg (4.19 lb.)