Emergency Stop Switch - Air Techniques ProVecta 3D Prime Instrucciones De Uso

Usage
Click OK to confirm the message�
i
EN
US
Release the head supports�
i
The patient can leave the X-ray room�
Remove the hygienic protective cover�
i
Remove and disinfect the positioning aids�
i
The unit can be returned to its starting posi-
i
tion by touching Start position� Otherwise, the
C-shaped arm is positioned via the imaging
software during adjustment of the parameters�

7.7 Emergency stop switch

The emergency stop switch stops the unit and
switches it off� It can be used if the unit is taking
an X-ray even though the exposure button is no
longer being pressed, or if the patient is injured
or the unit is damaged� It can also be used to
avert an unwanted collision�
The yellow stickers on the patient positioning
system with the symbol
the emergency stop switch�
Figure 4: Emergency stop switch sticker on
the operator side
34
OBJ_DOKU-0000003575-mehrere-005.indd 34
Figure 5: Emergency stop switch sticker on
the patient side
i
show the location of
Misuse of the emergency stop switch
can lead to data loss�
Press the emergency stop switch�
Device is switched off�
2210200496L41 1904V004
17.04.2019 14:29:03