Time Programming Function; Turning Off A Hotplate Automatically; Automatic Timer; The Timer - NEFF T43E20N1 Instrucciones De Uso

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
Select the required power level.
1.
Press the symbol. The
3
2.
up. is displayed in the time program function display. To
‹‹
select another hotplate, press the
until the indicator for the desired hotplate lights up.
x
Press the + or - symbol on the time program function. The
3.
basic setting appears:
+symbol: 30 minutes.
- symbol: 10 minutes.

Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to count down.
Once the time has elapsed
The hotplate switches off. The beep sounds, and in the time
program function display
‹‹
indicator lights up on the hotplate display. Pressing the
symbol turns off the indicators and stops the beeping.
Changing or cancelling the time
Press the symbol several times until the required
3
indicator lights up. Change the cooking time using the + or -
symbols, or set to .
‹‹

Cleaning protection

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning protection
function. Press the " symbol. An audible signal sounds. The
control panel is locked for 35 seconds. The surface of the
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
30
indicator of the hotplate lights
x
3 symbol several times

appears for 10 seconds. The
x
Notes
If a cooking time has been programmed for several
■
hotplates, it can be set to display all the time values. To do
this, press the
for the required hotplate lights up.
Any cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the 3 symbol several times until the required
indicator lights up. Change the cooking time using the + or -
symbols, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
3
1.
up. is displayed in the time program function display.
‹‹
Press the + or - symbol on the time program function. The
2.
basic setting will appear.
+symbol: 10 minutes.
- symbol: 5 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
x
is shown, and the
‹‹
3
the indicators turn off.
Pressing the
3
beep.
Changing or cancelling the time
Press the symbol several times until the
·
up. Change the time with the + or - symbols, or set to
symbol several times until the
3
.
‹‹
symbol several times until the
indicator comes on. After 10 seconds
S
symbol turns off the indicators and stops the
indicator
x
x
indicator lights
S
indicator lights
S
.
‹‹