Time Programming Function; Turning Off A Hotplate Automatically; The Timer; Keep Warm Function - NEFF TT86 Serie Instrucciones De Uso

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on.
Select the hotplate and desired power level using the Tipp
1.
control.
Press the 3 symbol. The
2.
up. ‹‹ is displayed on the time program function display.
Select the desired cooking time using the Tipp control.
3.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set to
.
‹‹

Keep warm function

This function is used for melting chocolate or butter and for
keeping food warm.

To activate

Select the required hotplate using the Tipp control.
1.
Within the next 5 seconds, press the
2.
The indicator lights up.
–
The "keep warm" function has been turned on.
x indicator on the hotplate lights
3
– symbol.
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays and the time program function screen displays
‹
for one minute. The
‹‹
Pressing any symbol turns off the indicators and stops the
beep.
Notes
If cooking times have been programmed for various plates,
■
the time program function displays the shortest cooking time.
The x indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
■
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
■

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
Press on the
1.
display shows
Select the required time using the Tipp control.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the symbol and change the time using the Tipp
3
control, or set to
Once the time has elapsed
A warning beep sounds. The time program function displays
and the indicator
‹‹
off the indicators and stops the beeping.
symbol

To turn off

Select the required hotplate using the Tipp control.
1.
Press the –
2.
The display turns off.
–
After five seconds, the hotplate turns off and the residual heat
indicator appears.
indicator of the hotplate flashes.
x
3 symbol, and the time program function
‹‹ .
.
‹‹
comes on. Pressing any symbol turns
V
symbol.
27