Internal Display; Vr (Vibration Reduction) Function; Target Priority Mode - Nikon MONARCH 7i VR Manual De Instrucciones

En ￭ Internal display
VR (Vibration Reduction) function-employing
Es
Fr
Pt
Laser irradiation mark
Distance
Horizontal distance mode
First Target Priority mode
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: "Failure to measure" or "Unable to measure"
*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
10
model indication
Target mark
Unit of measure (m/yd.)
Distant Target Priority mode
Battery condition
[Functions]

■ VR (Vibration Reduction) function

● ON and OFF
The VR (Vibration Reduction) function is activated concurrently when the Laser
Rangefinder is ON.
When the Laser Rangefinder is OFF, the VR (Vibration Reduction) function
automatically turns off.
■ Target priority mode (First Target Priority mode/Distant Target Priority mode)
This Nikon Laser Rangefinder employs the First Target Priority/Distant Target Priority switching system.
(Factory default setting is Distant Target Priority mode.)
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.
En
Es
Fr
Pt
11