Relative Humidity Level Display; Setting The Lighting Mode; Charcoal Filter Meter Display - Eurocave Revelation Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
6 - C
IV. Relative humidity level display (1-temperature model only)
Your wine cabinet has a function for measuring humidity levels, allowing
you to see the level of relative humidity inside the appliance.
The ideal level of humidity is above 50% and ideally between 60 and 75 %.
V. Setting the lighting mode
1
Press the
key.
The indicator of the active mode will flash
There are 3 setting options for lighting:
Permanent lighting (mood lighting for a cabinet fitted with a glass
door, for example).
Lighting which comes on when the door opens (it is switched off
when the cabinet door is closed).
Lighting disabled
VI. Charcoal filter meter display
When using the filter for the first time or replacing it, set the meter to 365.
1
Press the
key.
The display will flash.
3
Press the
to confirm
The alarm display will switch off
16
GB
OMMISSIONING YOUR WINE CABINET
If you want to increase the level of relative humidity in your cabinet, pour
the equivalent of one glass of water into the duct of the tray located on
the bottom right-hand side of the cabinet.
2 sec.
2
Press the
3
Press the
Precaution : bright light, never look directly at the LED beam.
2
Press the
You can consult the meter by pressing the
or
keys to select the desired mode.
key to confirm
key to set to 365.
key.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

V-revel-lV-revel-sS-revel-lS-revel-s

Tabla de contenido