V- Level Of Relative Humidity; Vi- Setting The Lighting Mode - Eurocave V 292 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7 - C

V- Level of relative humidity

Your cabinet has a humidity measuring function, allowing you to know what the level of relative
humidity is inside the appliance.
The ideal level of humidity is 50%.
If you wish to increase the level of relative humidity in your cabinet, pour the equivalent of one glass
of water into the duct of the tray located at the bottom right-hand side of the cabinet (see diagram
on the following page "Relative humidity level alarm").

VI- Setting the lighting mode

Your wine cabinet has ambient lighting allowing you to more easily read the labels on your bottles.
Unlike traditional lighting, EuroCave lights emit no ultraviolet and only generate a small amount of heat.
In this way, your wines are stored in total safety.
Additional electricity consumption is less than 7 Watts/hour when lighting is permanently on.
Precautions to observe:
Bright light, do not look directly at the beam.
There are 3 setting options for lighting:
- lighting off,
- lighting on when door opens (it is off when the cabinet door is shut),
- permanent lighting (for ambient lighting with a cabinet fitted with a glass door, for example).
• Press the
, key continuously, the main menu will appear. Press the
confirm.
• Press the
or
• Press the
key to confirm your selection.
Comment: When
is selected, you have 15 seconds to select and confirm the desired lighting
mode, otherwise the display automatically returns to the temperature of the cabinet.
VII- Pairing the remote control with the wine cabinet
To function, the remote control must be paired with your wine cabinet. If this is not the case, carry out this procedure within 2 minutes of plugging
in your wine cabinet.
• Press the
key continuously then press the
pictogram
is then selected.
• Press the
, or
key, the controls pictogram
Press the
or
Your remote control and cabinet are paired when the temperature and humidity are displayed.
If you have a second remote control, allocate a number to it which is different from that allocated to the one already in your possession.
1
6
ommissioning your Wine CaBinet
, key to select your lighting mode.
key to specify the number of the cabinet then confirm via the
is then selected.
key to specify the number of the remote control then confirm by pressing the
or
or
key to select the menu
key to select the menu
then press the
then press the
,
key.
key to
, key to confirm. The cabinet

Publicidad

Tabla de contenido
loading

Tabla de contenido