Rewind Starter - Stihl GS 461 Manual De Instrucciones

Ocultar thumbs Ver también para GS 461:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of the
proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
securely attached.) A loose connection
between spark plug boot and ignition
wire connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
30
Installing the spark plug
1
Install in the spark plug and tighten
2
N
Press on the spark plug boot (1)
N
firmly
Insert the air baffle (2) from above
N
Mount filter cover
N

Rewind Starter

To help prolong the wear life of the
starter rope, observe the following
2
points:
N
1
N
N
N
Have a damaged starter rope replaced
by your dealer before it breaks
completely. STIHL recommends that
you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Pull the starter rope only in the
direction specified.
Do not pull the rope over the edge of
the guide bushing.
Do not pull out the rope more than
specified.
Do not allow the starter grip to snap
back, guide it back into the housing
slowly – see chapter on "Starting /
Stopping the Engine."
GS 461

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido