CAMPAGNOLA SHAMAL CARBON Manual Del Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
1 - G E N E R A L N OT E S A N D C O M PAT I B I L I T Y
WARNING!
You must always read and comply with all the assembly, maintenance and operating instructions and do not forget that even the best product can be damaged
if it is not treated correctly. This manual is an integral part of the product and must be kept in a safe place for future reference.
If you sell or give away your wheels this booklet must be given to the new owner.
MECHANICAL EXPERTISE - The majority of bicycle maintenance and repair procedures require specific skills and experience and the use of appropriate tools. Basic
mechanical skills and aptitude may not be adequate for working correctly on your bicycle. Never overestimate your technical skills. Have assembly and maintenance work
done by a specialised mechanic. This is the only way to guarantee that the work is carried out correctly.
"AN ACCIDENT" - Please note that throughout this manual, reference is made that "an accident" could occur. Any accident could result in damage to your bicycle, its
components and, more importantly, could cause you or a bystander to sustain severe personal injury or even death.
DESIGNATED USE - This Campagnolo product is designed and manufactured exclusively for use on racing bicycles used on tarmacked roads or for trekking, cyclocross,
gravel. Any other "off-road" use of this product is prohibited (e.g. tandem, cross-country, all mountain/enduro or any other off-road discipline involving jumps or very uneven
surfaces with protruding or jagged rocks) and could result in accident, physical injury, or death and is therefore prohibited.
LIFESPAN - WEAR - INSPECTION REQUIREMENT - The lifespan of Campagnolo
components depends on many factors, such as rider size and riding conditions.
®
Impacts, falls, improper use or harsh use in general may compromise the structural integrity of the components and significantly reduce their lifespan. Some components
are also subject to wear over time. Please have your bicycle and its components regularly inspected by a qualified mechanic for any cracks, deformation, signs of fatigue
or wear (use of penetrating fluid or other visual enhancers to locate cracks on parts is recommended). Disassembly your bicycle components and especially the pedals,
is required during these inspections. If the inspection reveals any deformation, cracks, impact marks or stress marks, no matter how slight, immediately replace the com-
ponent; components that have experienced excessive wear also need immediate replacement. The frequency of inspection depends on many factors; check with your
authorized representative of Campagnolo S.r.l. to select a schedule that is best for you.
• If you weigh over 109 kg/240 lbs we advise you not to use this product. Non compliance with this warning can damage the product irreversibly.
• If you weigh 82 kg/180 lbs or more, you must be especially vigilant and have your bicycle inspected more frequently (than someone weighing less than 82 kg/180
lbs). Check with your mechanic to discuss whether the wheels you selected are suitable for your use, and to determine the frequency of inspections.
The components of Campagnolo
9s, 10s, 11s and 12s transmissions, as well as the brakes, rims, pedals and all other Campagnolo
products are designed as
®
®
a single integrated system. Not to affect safety, performance, longevity, functionality and the WARRANTY, use exclusively the parts and components supplied or
specified by Campagnolo S.r.l., without interfacing or replacing them with products, parts or components manufactured by other companies.
Note: Tools supplied by other manufacturers for wheels similar to Campagnolo
wheels may not be compatible with Campagnolo
wheels. Likewise, tools supplied by
®
®
Campagnolo S.r.l. may not be compatible with components/wheels supplied by other manufacturers. Always check with your mechanic or the tool manufacturer to insure
compatibility before using tools supplied by one manufacturer on components/wheels supplied by another.
The user of these Campagnolo
wheels expressly recognizes that there are risks inherent in bicycle riding, including but not limited to the risk that a component of the bicycle
®
can fail, resulting in an accident, personal injury or death. By his purchase and use of these Campagnolo
wheels, the user expressly, voluntarily and knowingly accepts
®
and/or assumes these risks, including but not limited to the risk of passive or active neglicence of Campagnolo S.r.l. or hidden, latent or obvious defects in the product, and
agrees to hold of Campagnolo S.r.l. harmless to the fullest extent permitted by law against any resulting damages.
1
CAMPAGNOLO.COM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bpra wto 2-way fit

Tabla de contenido