5.3 - SR AM CO R PO R ATI O N 1 1 S, 1 2 S SPR O CK ET S ( ON RL CA MPAGNOL O
This wheel is compatible with the SRAM XDR body. For instructions on mounting, removal and maintenance, refer to the instruction sheet provided by the sprocket pack
manufacturer.
WARNING!
Choose the version that is suitable for the type of brakes used. Do not use conventional brakes on a wheel with disc brakes and vice versa. The wrong combination
may cause accidents, injuries or even death.
Note: For instructions on brake use and maintenance, refer to the Instruction Sheet provided by the brake manufacturer.
• Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow
(Fig. 29).
• Fit the washer (A - Fig. 29) and screw the provided lockring (B – Fig. 29).
• Tighten the lockring to 40 Nm (354 in.lbs) using the tool UT-BB130 (C - Fig. 29 - not provi-
ded) and torque wrench (D - Fig. 29).
14
5 - S P R O C K E T A S S E M B LY A N D R E M OVA L
6 - B R A K E S
6. 1 - ASS EM BL IN G T HE ROTOR ON A X IA L FIX ING SYSTEM