Compatibility Guidelines For Ipgs With Compatible Headers; Appendix B: System Components And Accessories - St. Jude Medical GII Proclaim Manual De Instrucciones

The IPG has the following operating parameters.
Table 4. Operating parameters for the IPG
Parameter Tonic Range
Pulse width 20–1000 µs
Frequency 2–200 Hz
200–500 Hz
500–1200 Hz
Burst rate —
frequency
Intraburst —
frequency
Amplitude 0–25.5 mA
NOTE: Columns with * represent operating parameters for burst programs on IPGs capable of burst
stimulation mode.
NOTE: The number of stim sets in use for a tonic program governs the maximum frequency
(1200/number of stim sets).
NOTE: The maximum current depends on the impedance, frequency, and pulse width settings.

Compatibility Guidelines for IPGs with Compatible Headers

IPGs with compatible headers are compatible with the following Medtronic™ leads and extensions
available before May 15, 2015. (Medtronic is a trademark of Medtronic, Inc.)
Table 5. Compatible Medtronic leads and extensions
Device Model
Permanent lead 3776-45, 3776-60, 3776-75, 3876-45, 3876-60, 3876-75, 3777-45, 3777-60,
3777-75, 3877-45, 3877-60, 3877-75, 3778-45, 3778-60, 3778-75, 3878-45,
3878-60, 3878-75, 39286-30, 39286-65, 39565-30, 39565-65
Extension 3708120, 3708140, 3708160, 3708220, 3708240, 3708260, 3708320,
3708340, 3708360

Appendix B: System Components and Accessories

The Proclaim™ neurostimulation system includes the following components.
NOTE: Not all models are available in all countries. Contact your local representative for more
information.
ARTMT100140147B.pdf 16
Tonic Steps Burst Range*
10 µs 20–1000 µs
(20–500 µs range)
50 µs
(500–1000 µs
range)
2 Hz —
10 Hz —
20 Hz —
— 10–60 Hz
— 250–500 Hz
500–1000 Hz
0.1–1.0 mA 0–12.75 mA
12
Burst Steps*
50 µs
—
—
—
10 Hz
10 Hz
20 Hz
0.05–1.0 mA
5/2/2016 3:20:10 PM