Torque Values Of The Screw Connections - Otto Bock C‑Leg 3C98-1 Manual De Instrucciones

2.3 Torque Values of the Screw Connections

INFORMATION
The torque values for additional as well as optional system components (in item 3 below) are indicated in the
Instructions for Use of those products.
15 Nm
1
Using the 710D4 Torque Wrench with the 710Y2=5 Hex Bit, turn the screws alternatively to the prescribed torque
so that the torque is gradually increased:
1 Tube adapter: 15 Nm
2 Clamp: 7 Nm
Fitting for short residual limb
3 Rotation adapter or sliding adapter: 15 Nm
Fitting for long residual limb
4 Lamination anchor with threaded connector: 10 Nm
7 Nm
2
15 Nm
10 Nm
3 4
39