Activating the 1st mode:
1
INFORMATION
If the C-Leg® is in the 2nd mode, this is the way to switch to the 1st mode.
If the C-Leg® already is in the 1st mode, this mode will be reconfirmed.
The 1st mode remains turned on until the patient actively switches to the 2nd mode.
Activating the 2nd mode:
1
INFORMATION
If the C-Leg® is in the 1st mode, this is the way to switch to the 2nd mode.
If the C-Leg® already is in the 2nd mode, this mode will be reconfirmed.
The 2nd mode remains turned on until the patient actively switches to the 1st mode or the charging process is
started.
44
1 Activation of the remote control: Press key 3
and kep it pressed (Fig. 1) until the joint confirms the
activation with a vibration signal.
2 Activation of the 1st mode: Within 3 seconds
after activation of the remote control press key 1 and
keep it pressed (Fig. 2). You will hear a beep signal,
and the joint switches to the 1st mode.
2
1 Activation of the remote control: Press key 3
and kep it pressed (Fig. 1) until the joint confirms the
activation with a vibration signal.
2 Activation of the 2nd mode: Within 3 seconds
after activation of the remote control press key 2
and keep it pressed (Fig. 2). You will hear two beep
signals, and the joint switches to the 2nd mode.
2