Hot Water - SOLAC espression CA 4805 Instrucciones De Uso

Note: when you are using ground coffee, you can not
prepare two cups at the same time, so that only the selec-
tor for one cup will be lit.
5. When the coffee machine stops dispensing the coffee,
you can pick up your cup.
6. If you are not going to prepare any more coffee using
ground coffee, press the ground coffee button again. The
icon will turn off.
IMPORTANT: While the coffee machine is pouring the
coffee, you can stop the extraction process by pressing
the extraction selector for 1 coffee cup.
Note: the process will stop if you open the side door or
remove the drip tray during the extraction or brewing
process.

12 HOT WATER

1. Ensure that the coffee machine is ready.
2. Place a glass or cup under the steamer.
3. Press the "hot water" button. The hot water icon will
light up and the coffee extraction selector lights will
turn off.
4. Turn the steam regulator counter clock-
wise until it reaches the stop (180º).
Close it when the amount of hot water
desired is obtained.
5. Remove the glass or cup that has been
filled with hot water.
6. Press the "hot water" button again to
deactivate this function. The hot wa-
ter icon will turn off.
7. The two coffee extraction selectors will light up again,
indicating that the coffee machine is ready to prepare
coffee.
13 STEAM
1. Ensure that the coffee machine is ready.
2. Place the cup or jug under the steamer.
3. Press the "Steam" button. The steam symbol icon will
start to flash while the coffee machine is heating up and
the light of the two coffee extraction selectors will turn
off.
When the coffee machine is ready to obtain steam, the
light will be permanently set.
The maximum steam extraction period will be 4 minutes.
4. Place a container under the steamer, open it by turning the
steam regulator counter clockwise to drain any residual wa-
ter that could be present in the steamer. Close the steamer
and remove the water.
10