Connect the power cord with the power supply and the
power pack. The Power On indicator on the power pack
lights up in green and the illuminated ring on the
charging base briefly lights up.
Handpiece
Remove the handpiece from its packaging and clean the
light probe and the handpiece (see chapter Maintenance
and Cleaning). The light probe can be removed and
reattached by slightly rotating it.
After that, mount the anti-glare cone on the light probe.
Battery
We recommend fully charging the battery before the first
use. If the battery is fully charged, it features a curing
capacity of approx. 20 minutes.
Slide the battery straight into the handpiece until you
hear and feel it click into place.
Gently place the handpiece in the
corresponding rest in the charging
base without using any force. If a
hygiene sleeve is used, please
remove it before you charge the
battery. If possible, use the light
always with a fully charged battery.
This will prolong the service life. It
is therefore recommended to place
the handpiece into the charging
base after each patient. If the
b attery is fully discharged, the
charging time is 2 hours.
9