Replacement Parts And Accessories - Hach HHPC 6+ Manual Del Usuario

Table 4 Warnings
Warning Description
Laser current Occurs when the laser current exceeds ±30% of the nominal
level.
Buffer full The instrument is powered on and the buffer is full. Old data
will be overwritten.
Flow system A Flow Alarm warning occurs when the firmware is unable to
maintain a steady state.
Overconcentration Occurs when concentration limits of the sensor are
detected. The warning clears when concentration values
return to normal.
Calibration failure Occurs when the calibration signal registers a sensitivity
change of ± 10% size error in the first channel.

Replacement parts and accessories

Note: Product and Article numbers may vary for some selling regions. Contact the
appropriate distributor or refer to the company website for contact information.
Description
Adapter for zero count filter
Charge cradle
Power supply
USB cable
Zero count filter
Carrying case
16 English
Item no.
2089398
2089380-01
230-300-1000
460-400-0002
VP212808
2089328-01