Default Screen; Menu Icons - Hach HHPC 6+ Manual Del Usuario

Default screen

When the instrument power is applied, the display shows a splash
screen, then the default Sample Screen
Figure 4 Sample screen
A sample process can be started from this screen. The process uses the
stored Sample Setup values. For more information on how to set up
samples and a sample process, refer to
Start a sample process with normal view
8 English
(Figure 4).
Sample setup on page 11 and
on page 12.

Menu icons

Icons in the Navigation Menu are shown horizontally. The icon in the
middle of the screen is shown highlighted, (i.e., larger and brighter).
Arrows above and below an icon indicate that sub-menus exist
(Figure 5).
Figure 5 Example of an icon with submenu options
To go to the Navigation Menu and select a menu option:
1. Push the Menu button.
2. Push the right or left arrow buttons to highlight an icon. Push the Up
or Down arrow buttons to move through sub-menu options.
3. Push the Select button to accept the highlighted icon.
The menu or screen for the selected option appears.
4. View data or edit and configure fields as necessary.
Fields and controls in a screen may include radio buttons, text and
numeric fields, check-boxes and drop down menus. An onscreen
keyboard appears when the cursor is in a text field. Use the
keyboard to put data in the field.