Printing With Series-Parallel Adapter - Chauvin Arnoux C.A 6545 Manual De Instrucciones

INSULATION RESISTANCE TEST
PURPOSE: 01
Description: ..................................................
.....................................................................
Date: .......................................... 31.03.1998
Starting time: .................................... 15h 10
Running time: ........................ 15 min 30 sec
Temperature: .............................. °C .........°F
Relative humidity: ..................................... %
Test voltage: ...................................... 1000 V
Insulation resistance (R): ................ 385 GΩ
DAR: .................................................... 1,234
PI: ........................................................ 2,345
DD: ...............................................................
Capacity: .................................................. µF
I residual: ................................................ nA
Comments: ..................................................
.....................................................................
Date of next test : .......................... /..../.......
A line for the signature of the operator appears at the end of printing.
6.4

Printing with series-parallel adapter

1. Connect RS232 null-modem cable to C.A 6547
2. Connect this cable to the adapter, then connect the adapter to the printer cable.
3. Turn on the printer.
4. Turn on the C.A 6547
5. To print non-recorded measurements (immediate print), press PRINT after performing a measurement.
6. To start a printing of recorded measurements, press the "PRINT MEM" key
!
CAUTION: This adapter is exclusively designed to be used with the C.A 6543 and the C.A
6547 and cannot be used with any other applications.
TEST: 02
56