Mounting The Bar And Chain - Stihl MSE 170 C Manual De Instrucciones

English

Mounting the Bar and Chain

(quick chain tensioner)
WARNING
Do not connect the power tool to the wall
outlet yet.
Removing the chain sprocket cover
1
3
Pull the hinged handle (1) out until it
N
engages in the upright position.
Turn the wingnut (2)
N
counterclockwise until it hangs
loose in the sprocket cover (3).
Remove the chain sprocket
N
cover (3).
Fitting the tensioning gear
1
Remove the tensioning gear (1) and
N
turn it over.
26
2
Take out the screw (2).
N
1
Line up the tensioning gear (1) and
N
guide bar (3).
2
Insert the screw (2) and tighten it
N
down firmly.
Disengage the chain brake.
Pull the hand guard towards the
N
front handle until there is an audible
click – the chain brake is
disengaged.
3
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
MSE 170 C, MSE 210 C