Usb And Ios Devices; Connect To Your Home Network; Connect The Radio Antennas; Connect Ir Equipment - Harman Kardon AVR 1510S Manual Del Usuario

AVR
Connect Your Analog Audio Devices
Use the AVR's analog audio connectors for source devices that don't have HDMI or digital
audio connectors.
Stereo Audio Cable
(not supplied)
To Stereo Analog
Audio Output
Analog Source Device

USB and iOS Devices

Use the AVR's front-panel USB port to connect an iPod, iPhone or iPad using an Apple
cable (not supplied) or to directly connect a USB memory stick. You can play audio files
from the device or memory stick and use the AVR's remote to control playback.
AVR
Front-Panel
USB Port
USB
Memory
Stick

Connect to Your Home Network

Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR's Network connector to
your home network to enjoy Internet radio and content from DLNA-compatible devices
that are connected to the network.
AVR
Network
Connector
Cat. 5/5E Cable (not supplied)
AVR
Analog Audio Connectors
Apple Cable
(not supplied)
Network
Modem
To Home
Network
and Internet

Connect the Radio Antennas

• Connect the supplied FM antenna to the AVR's FM 75Ω antenna connector. For the
best reception, extend the FM antenna as far as possible.
• Bend and fold the base of the supplied AM antenna as shown and connect the
antenna wires to the AVR's AM and Gnd connectors. (You can connect either wire to
either connector.) Rotate the antenna as necessary to minimize background noise.
AVR
Antenna
Connectors
FM Antenna (supplied)

Connect IR Equipment

The AVR is equipped with a Remote IR Input connector that lets you remotely control the
AVR in a variety of situations:
• When you place the AVR inside a cabinet or facing away from the listener, connect
an external IR receiver, such as the optional Harman Kardon HE 1000, to the AVR's
IR In jack.
External IR
Receiver
AVR and Source Devices
Installed Inside of Cabinet
Making Connections
AM Antenna
(supplied)
Bend and fold base
AVR IR In Jack
17