Eu Declaration Of Conformity - Festool LEX 2 185/7 Manual De Instrucciones

8.3 Lubrication
If the tool is not used for longer periods, e.g. for a
weekend, introduce 1 or 2 drops of lubricating oil
into the compressed-air supply [5-2] on the tool
prior to use.
8.4 Replacing the silencer
In order to maintain the power and performance of
the compressed air tool, replace the silencer on the
IAS hose systems at regular intervals.
8.5 Cleaning the extraction channels
We recommend cleaning the extraction channels in
the machine roughly once a week (particularly if
sanding synthetic resin, in the case of wet sanding
and if sanding plaster) [5-3]using a small flat brush
or a cloth.
9 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
10 Environment
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Information on REACh:www.festool.com/reach
11

EU Declaration of Conformity

Compressed air eccentric sander
LEX 2 185/7
Year of CE mark: 2002
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
DIN EN ISO 11148-8 i.a.w. the provisions of 2006/
42/EC Directive.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-05-31
LEX 2
GB
Serial no.
491525
17