Storing Stations; Storing Stations Automatically (Travel Store); Listening To Stored Stations; Scanning Receivable Stations (Scan) - Blaupunkt Seattle MP57 Instrucciones De Manejo

Radio mode
When you have fi nished making your
changes,
u press the OK button B.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.

Storing stations

Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
u
Tune into the desired station.
u Briefl y press on the softkeys 6 to
;.
The assignment of all six memory locations
is displayed.
u
Press and hold down one of the softkeys
6 to ; for longer than two seconds
to assign the station to that button.
Storing stations automatically
( Travel Store)
You can automatically store the six sta-
tions offering the strongest reception in
the region for the FM and AM wavebands.
The stations are stored in the FMT or AMT
memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
18
u Press the BAND button ?.
The "Tuner" menu is displayed.
Press the softkey "Travel Store" 9.
u
The storing procedure begins. "Travel Store"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.

Listening to stored stations

u
Select the memory bank or waveband.
Briefl y press on the softkeys 6 to
u
;.
The assignment of all six memory locations
is displayed.
Press the softkey 6 to ; where the
u
desired station is stored.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
( Scan)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting Scan
u Press and hold down the OK button B
for longer than 2 seconds.
The radio scans the next receivable station.
"SCAN" and the current frequency or the
station name appear intermittently on the
display.