Limits Mode Activation; Delete The Limit Values - Baxtran ADA Serie Manual De Instrucciones

10.2 LIMITS MODE ACTIVATION.

Within the INSPECT mode(once the limits have been set):
1. Press the
2. Press the
3. Press the
4. Place the weight on the weighing pan
5. If the display shows "LOW" it means that the weight of the object is lower than the value of the lower limit, if it shows " HI"
accompanied by the acoustic warning it means that the weight of the object is higher than the value of the upper limit, and if the
display shows " OK " it means that the weight of the object is between the lower and upper limit.
6. If desired, the results can be printed out by pressing the
7. Remove the weight from the weighing pan
TO EXIT THE LIMITS MODE
1. Press the
2. Press the
DISPLAYED
3. Press the

10.3 DELETE THE LIMIT VALUES

1. Press the
2. Press the
DISPLAYED
3. Press the
46
key repeatedly until "ENABLE"is displayed.
key
key
key
key repeatedly until "InSPECT" IS
key
key
key repeatedly until "InSPECT" IS
key
USER'S MANUAL ADA-APD
key
4. Press the key repeatedly until "DISABLE" is
displayed.
5. Press the key, and the scale will exit the
weight limit function.
4. Press the key repeatedly until "CLEAR"is
displayed.
5. Press the key to delete the entered data.
EN EN