Descargar Imprimir esta página

Bosch PowerPack 400 Manual Del Propietário página 73

Ocultar thumbs Ver también para PowerPack 400:

Publicidad

Idiomas disponibles

Idiomas disponibles

English–7
Indications and Settings of the on-board
computer
Energy supply of the on-board computer
If the on-board computer is in the holder 4, a sufficiently
charged battery pack is inserted into the eBike and the
eBike system is turned on, then the on-board computer is
powered by the eBike battery pack.
If the on-board computer is removed from the holder 4, the
energy is supplied via an internal battery pack. If the inter-
nal battery pack is weak when the on-board computer is
switched on, "Attach to bike" will appear in text indication
d for 3 s. The on-board computer will then turn off again.
To charge the internal battery pack, put the on-board com-
puter back in the holder 4 (when a battery pack is inserted
in the eBike). Switch the eBike battery pack on by its
On/Off button (see battery pack operating instructions).
You can also charge the on-board computer via the USB
port. Open the protective cap 8. Connect the USB port 7 of
the on-board computer via a suitable USB cable to a stan-
dard USB charger or the USB port of a computer (5 V charg-
ing voltage, max. 500 mA charging current). "USB con-
nected" will appear in the text indication d of the on-board
computer.
h
g
f
e
Switching the on-board computer On/Off
To switch on the on-board computer, briefly press the
On/Off button 5. When the internal battery pack is suffi-
ciently charged, the on-board computer can also be
switched on when not inserted in the holder.
To switch off the on-board computer, press the On/Off
button 5.
When the on-board computer is not inserted in the holder
and no button is pressed, it automatically switches off after
1 min to save energy.
 If you do not use your eBike for several weeks, re-
move the on-board computer from its holder. Store
the on-board computer in a dry environment at room
temperature. Regularly recharge the on-board comput-
er's battery pack.
1 270 U20 XBI | (20.4.16)
i
TURBO
a
SPORT
TOUR
b
ECO
OFF
c
MPH
KM/H
AMM
PMWH
MIN
MPH
KM/H
Range
d
Battery charge-control indicator
The battery pack charge-control indicator i indicates the
charge condition of the eBike's battery pack, and not the
charge condition of the on-board computer's internal bat-
tery. The charge condition of the eBike's battery pack can
also be read from the battery pack's LEDs.
On indicator i, each bar of the battery pack symbol is equiv-
alent to a capacity of approx. 20 %:
The eBike battery is fully charged.
The eBike battery should be recharged.
Once there are no remaining LED bars illuminated
on the charge-control indicator, the motor support
is gently switched off and the charge-control indica-
tor begins to flash. The flashing charge-control indi-
cator means there is only enough battery power re-
maining to power the eBike lights for approximately
2 more hours. This does not account for other con-
sumers (e.g., automatic gearbox, charging external
devices at the USB port).
When the on-board computer is removed from holder 4,
the last indicated battery pack charge condition is stored.
If an eBike is operated with two battery packs, the battery
charge-control indicator i displays the level of both battery
packs.
If an eBike has two battery packs being
OF
charged on the bike, the charging progress of
MPH
KM/
both battery packs will be indicated on the
display (the left-hand battery pack is being
charged in the illustration). You can tell by
the flashing indicator on the battery pack
which of the two battery packs is being
charged.
72
Bosch eBike Systems

Publicidad

loading