Troubleshooting; Ce Declaration Of Conformity - Triton T12RS Instrucciones De Uso

Troubleshooting

Problem
Red LED does not illuminate and Battery (9) not charging
Battery has low capacity
Saw cannot be switched on (Trigger (6) does not move)
Saw does not start when Trigger is pressed
Poor cutting action
When cutting an unsecured workpiece, the workpiece is
vibrating and moving with the cut
Guarantee
To register your guarantee visit our web site at
tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for
information on future releases. Details provided will not be made available to any third
party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: T12RS Retain your receipt as proof of purchase

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Triton
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: XXXXX
Description: XXXXX
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• Outdoor Noise Directive 2000/14/EC
• EN60745-1
• EN60745-2-1
• EN60745-2-2
• EN60335-1
• EN60335-2-29
Possible cause
Battery not fully seated
Battery Charger (13) not powered
Battery not being fully charged
Battery has been charged over 100 times and capacity has
started to reduce
Trigger Lock (5) is engaged
Battery completely discharged
Defective Battery
Saw defective
Worn or incorrect blade
Material may be beyond the capabilities of the saw with the
fitted blade despite the blade matching the material
There is a gap between the Shoe (1) and the workpiece
The blade is bi-directional
The blade tooth pitch is too coarse
Triton Precision Power Tools guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 3 YEARS from the
date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and
tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
t pr
ar
This does not affect your statutory rights
Notified body: TÜV Rheinland Co., Ltd
The technical documentation is kept by: Triton
Date: XX/XX/XXXX
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ, United Kingdom.
Solution
Refit Battery correctly
Recheck mains connection
Wait until Green LED is illuminated
This is normal for batteries. Contact your Triton dealer to
purchase a replacement battery
Move Trigger Lock to the unlocked position
Recharge Battery or replace with a fully charged battery
Replace Battery
Contact your Triton dealer or authorised service centre
Replace blade
Replace blade with a finer tooth pitch blade to reduce the
load on the saw motor
Ensure there is no gap, see image C
Use a uni-directional blade so it mainly cuts as it pushes the
material towards the Shoe (1)
Use a finer tooth pitch so less material is cut per
reciprocating action and smoother cutting
oves to be defecti
GB
9