Appendix C. - Technical Specifications; General Specifications - Baofeng UV-5R Serie Manual De Instrucciones

Menu Name (Full Name) Setting
36 RP-STE - Squelch OFF [0] | 1 - 10
Tail Elimination
37 RPT-RL - Delay OFF [0] | 1 - 10
the squelch tail
of repeater
38 PONMSG - Power FULL [0]: Performs an LCD
On Message screen test at power-on
MSG [1]: Displays a 2-line
power-on message
39 ROGER- Roger OFF [0] | ON [1]
Beep
40 RESET - Restore VFO [0] | ALL [1]
defaults
35
Description
This function is used eliminate squelch tail noise
when communicating through a repeater.
Delay the Tail Tone of Repeater
(X100 milliseconds).
Controls the behavior of the display when the
transceiver is turned on.
When set to MSG [1] the computer software
programmed message is displayed up to 2 lines
and at 6 characters per line.
Sends an end-of-transmission tone to indicate
to the other stations that the transmission has
ended.
Resets the radio to factory defaults, with some
exceptions.

Appendix C. - Technical Specifications

General

General Specifications

Specification
Frequency Range (MHz)
Memory channels
Frequency stability
Frequency step (kHz)
Antenna impedance
Operating temperature
Supply voltage
Consumption
Mode of operation
Duty cycle
Dimensions(mm)
Weight (g)
Value
144-148( Rx only)
420-450MHz
128 total (0-127)
2. 5ppm
2.5K/5.0K/6.25K/10.0K/12.5K/20.0K/25.0K/50.0K
50 Ohm
-20 o C to +60 o C
7.4V
≤75mA (standby)
380mA (reception)
≤1.4A(transmission)
Simplex or semi-duplex
03/03/54 min. (Rx/Tx/ Standby)
58X110X32
214
36