5
INSTALL THE ICEMAKER
FILL CUP
Install the icemaker fill cup (side-mounted) (17) into the
icemaker as shown.
PLUG IN THE ICEMAKER
6
Holding the icemaker in place, insert the icemaker
power cord plug (D) into the socket on the rear wall,
making sure the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in place
by clipping the restraints onto each side of the plug.
Make sure the restraints click into place.
Installation Instructions
17
D
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube (16) goes into the
fill cup opening (17). Hang the icemaker on the
two screws (14).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup opening
at the back of the icemaker. (Check the rear of
the refrigerator to make sure the fill tube has not
been pushed out of the back of the refrigerator).
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREW.
8
INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is set to OFF.
9
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
10
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
43
16
17
11