5
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (17) into the
icemaker as shown.
6
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in place
by clipping the restraints onto each side of the plug.
Make sure the restraints click into place.
Installation Instructions
17
55
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube (16) fits in the fill
cup opening (E). Hang the icemaker on the two
mounting screws (C) on the mounting block.
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup opening
on the back of the icemaker. (Check the rear of
the refrigerator to make sure the fill tube has not
been pushed out of the back of the refrigerator).
Make sure the icemaker power switch is set to OFF.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
C
8
INSTALL THE ICE BUCKET
Place the lower freezer
basket back into the
freezer drawer.
The upper freezer basket
is actually 2 baskets
hooked together. Remove
basket on the left by
unhooking it.
Place the remaining
upper basket in the freezer
drawer on the right side. Place the ice bucket in
the left side of the lower basket.
9
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
10
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
16
E