Amann Girrbach laserpin Modo De Empleo página 7

Technical Data:
D/W/H:
Weight:
Mains supply:
E-fuse:
Power:
Motor speed:
Accuracy:
Drill stroke:
Collet capacity:
Laser class:
Laser wavelength:
Accessories/single components:
Order No.
172316 HM drill ø 1,60 mm
172317 HM drill ø 1,75 mm
172319 HM drill ø 1,95 mm
172320 HM drill ø 2,00 mm
172321 HM drill ø 2,10 mm
172311 Fork wrench SW 15
172312 Fork wrench SW 17
172313 Allen key SW 2,5
Package contents:
Order No.
172300 Laserpin apparatus
Incl.: HM drill ø 1,95 mm
Fork wrench SW 15
Fork wrench SW 17
Allen key SW 2,5
User manual
360 x 140 x 240 mm
6 kg
230V 50Hz
T 0,8 A
160 W
3000 min -1
< 0,03 mm
continuously adjustable
0–12,5 mm
ø 2,5–3,00 mm
2
680 nm
WARNINGS AND
!
SAFETY ASPECTS:
• never push your hand on the base plate
• switch off the apparatus when not using it
• while cleaning the unit, switch of the mains
• never grasp a drill while it is rotating
• use only the original drill
• when drilling, hold model securely and press
on the base plate
• do not look directly into the laser beam
• when drilling performance declines, change
the drill do not place finger on drill hole and
press down (special care should be taken
during start-up)
• when pushing down the magnetic disc the
drill appears
• Precaution with long hair and sleeves
GB
7