Labeling The Module; Connecting The Bus Coupler Electrically - Aventics AS-i Instrucciones De Servicio

64 AVENTICS | AS-i | R499050017–BDL–001–AE
Assembly
Bus coupler
1
Fig. 10: Labels on the AS-i 8DI/8DO (1), AS-i 4DI/4DO (2), AS-i 8DO (3), AS-i 4DO (4) bus couplers
(AUX version)
6.2

Labeling the module

Label the bus couplers (1 to 31) with the address provided/
O
used for the bus coupler in the BTN field on the side with the
bus connection and, if necessary, also on the label on the
AS-i connection.
2
6.3

Connecting the bus coupler electrically

Applied electric voltage
Danger of injury from electric shock
Make sure the relevant system component is not under
O
pressure or voltage before electrically connecting
modules to the valve terminal.
3
CAUTION
4